HIT Sign in

All fields are required.
HIT ID*

Register
Password*
 
cancel
繁体中文 Spanish Russian Portuguese
RUBBER SHEET
With the widest product range in the market, HIT can deliver rubber sheeting and rubber matting, quickly and reliably for all areas of use.

Common applications include sealing, bearing parts and protection.

Our extensive range of rubber mattting products is suitable for most uses and is extraordinarily tough in all applications like public places as rooms, shops, restaurants, stairways, entrances, airports, buses etc.

We can offer:
Smooth on both sides.
Smooth on one side + cloth impression on the other side.
Cloth impression on both sides.
Other special designs on one or both sides.
Sheets available in rolls, strips, plates o tiles.
Thickness from 0.2 mm to 50 mm.
Widths available up to 2000 mm.



General purpose rubber sheeting

With more resistant to ageing, temperature and middle pressure, water-proof, anti-shock and sealing etc.
General purpose rubber sheeting mainly used as sealing gasket, sealing strip, it also could be put on the workbench or used as rubber matting.

Specification
Thickness: 1mm-50mm
Width: 0.5m-2m
Length:1m-30m


Synthetic

Nitrile(NBR) Rubber


With Excellent resistance to oils, solvents and fuels. Resistant to a broader range of aromatic hydrocarbons than neoprene. Nitrile may be blended with SBR rubber to achieve an economically priced sheet or moderately oil resistant applications. Temperature range: -30°C to +120°C, with the possibility of reaching -40°C.

Neoprene(CR) Rubber

Excellent mechanical and abrasion properties even without reinforcing fillers;
Good resistance to heat, ozone and weathering.
Resistance to chemicals; resistant to inorganic chemical products , except oxidising acids and halogens.
Moderate resistance to aliphatic hydrocarbons

EPDM Rubber

Excellent resistance to ozone, sunlight and oxygen.
Excellent resistance to acid, alkali and ketones.
Excellent inherent high and low temperature ranges. Typically -45°C to +120°C for standard compounds.

ButyI Rubber

Excellent resistance to ozone, oxidation and sunlight.
Has very low resilience which makes it ideal for vibration damping and shock absorption applications.
Resistance to chemicals; resistant to most inorganic products. Highly resistant to mineral acids, alkalines and aqueous acids.



Special

Hypalon Sheeting

Excellent resistance to oxidation and has outstanding resistance to atmospheric conditions an in particular strong sunlight and ozone.

CSM compounds resist fire and are self extinguishing when the flame is removed.

Resistance to chemicals; resistant to most inorganic chemical products, good resistance to general acids, oils and greases.

Silicone Rubber Sheet

Silicone rubber is good on surface, high stability and durable.

Excellent in softness, elasticity, insulation, air tightness, ozone resistance, weather fastness and alcohol, animal/plant oil and polar organic resistant.

Silicone rubber is widely used for membrane press of solar energy lamination machine, wooden and glass industry.



Viton Rubber

Viton is serviceable in continuous heat of up to 250º C and intermittent heat of up to 300º C.

Satisfactory resistance to low temperatures of typically -20º C and - 40º C by use of special grades.

Good flame resistance and are usually self extinguishing upon removal of flame source.

Have excellent resistance to oxygen, ozone and natural weathering.


Natural Gum Sheeting

Good gasket material due to excellent physical properties such as resilience, tear strength and wear resistance.

Natural rubber is used effectively as sand and shot blast curtain material because of it's high abrasion resistance and resilience.






Rubber matting

Puttern Rubber Matting

 

            

Fine rib matting:Thickness:2.5-6mm; Width:1.5m            Corrugated matting:Thickness:2.5-6mm; Width:2.0m
 

            

Thick rib matting:Thickness:2.5-6mm; Width:2.0m          Flat rib matting:Thickness:2.5-6mm; Width:2.0m
 

            

Stud matting:Thickness:3-6mm; Width:1.5m                          Small stud matting:Thickness:3-6mm; Width:2.0m
 

            

Checker matting:Thickness:3-6mm; Width:1.5m                    Pyramid matting:Thickness:3-6mm; Width:2.0m
 

            

Checker matting:Thickness:3-6.5mm; Width:1.5m                 Pyramid matting:Thickness:3-10mm; Width:1.2m

Anti fatigue Rubber Matting
 

            

Thickness:16; Width:914m Length:914                              Thickness:16; Width:914m Length:914
 

            

Thickness:16; Width:914m Length:914                              Thickness:20; Width:920m Length:920


Agriculture Rubber Matting
 

            

Cow matting 01:Thickness:8-25mm; Width:2m                 Cow matting 02:17mmx1220mmx1830mmLength:920
 



Hose matting:Thickness:2.5-6mm; Width:1.5m


Skirting Rubber

Description:
Skirting rubber is a general purpose rubber used mainly in the mining industry as a side skirt on conveyor belt systems to prevent the materials falling down. It is available in full width slabs up to 2000 mm wide and also pre-cut skirting strips.
 


STD 60 Duro
A general purpose grade of natural rubber used for many quarrying and mining applications in dust and spillage control.

Soft 40-50 Duro
A softer grade natural rubber, with good tensile and elongations properties, it is ideally suited for conveyor skirting applications where belting wear is of concern. The rubber is also used where a flexible, but abrasive resistant seal is required.

Specification:
Width: 76 -- 2,000 mm
Thickness: 2 -- 50 mm
Roll length: 3 -- 30 m



 

Parameter of rubber:Tension strength: Normally 2.5mpa -- 6mpa,
Elongation: ≥ 250%, 300%
Hardness: 50, 60, 70 shore A
Other specification available as special order.


Pulley Lagging

  Conveyor Belt when slips causes significant damage to the drive pulley and the belt. Such damages are not only expensive to repair, but also time consuming and cause enormous loss due to down time.
   
  The life span of a conveyor system primarily depends on its being suitably equipped for the specific application and the standard of servicing and maintenance. The conveyor systems often have to perform in the most difficult conditions.For example rain and sludge, which cause slippage between the conveyor belt and pulleys because of the friction co-efficient between the two going down very low.
   
  Pulley Laggings, with specially developed rubber materials and their patterned surfaces have proved to be very effective in water shedding, preventing material build up and controlling belt slippage.
   
  Diamond Profile black lagging is ideal for small diameter pulleys on systems with black conveyor belt.
It prevents belt from slippage (in particular when water is present) and increase the drive traction of the pulley.
For Drive pulleys, a friction lagging should always be used.
The type of friction lagging should be selected by the customer according to its application.
   
  Availability 
Widths ranging from 1000mm - 2000mm 
Thickness: 8mm - 12mm. 
Length: 10M-20M 
Technical Data: Tensile Strength:7MPA Density:1.45g/cc Elongation:300% 
Other specification available as special order.


Chute Lining

Chute Lining is designed to be an integral part of a conveyor system to protect and cushion the chute from the material being handled

Main features:

Protects chute from wear and corrosion
High wear and cut resistance
High impact resistance
Significantly reduces noise pollution
Available in various sizes and thicknesses
Reduces build-up and facilitates free flow
Special applications available: abrasion-resistant, chemical, heat, etc
Site or factory fitted


Prev:第一页
Next:最后一页
keywords:FHP Belt FHP Belt 汇添富主管